BUNTING BEARINGS Bearing
Bunting Bearings is endeavoring to reduce its carbon footprint by using the world's resources as wisely as we can. This is enabling us to lower our consumption of Gas, Electricity and Raw Materials.
Bearings extend the working life of wheels, pulleys, and other rotating parts by reducing friction and enabling parts to move smoothly. Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads. Axial (thrust) bearings support loads parallel to the axis of the shaft, such as those exerted by a table supporting a weight. Radial bearings support rotating wheels and other applications where the force of the load is perpendicular to the shaft. Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads. Mounted bearings (bearing units) have a bearing inside a housing unit to ensure a secure fit and mount. Sleeve and clip bearings support high loads, have no moving parts, and require lubricant to allow the shaft to turn smoothly. Spherical bearings and spherical rod ends are used on articulating joints and when the bearing must accommodate for axial misalignment.
- BUNTING BEARINGS AA1803-11 Bearings
- 22230 CCK/W33
- 539.75 mm
- BUNTING BEARINGS AA1715-2 Bearings
- 4800 rpm
- 49000 N
- BUNTING BEARINGS AA1608-1 Bearings
- 13500 N
- 19000 rpm
- BUNTING BEARINGS AA1517-1 Bearings
- G 1/4
- HMV 92 E
- BUNTING BEARINGS BBEP323616 Bearings
- 1.00 mm
- 25.000 mm
- BUNTING BEARINGS BBEP243224 Bearings
- 70 mm
- e7
- BUNTING BEARINGS EW142402 Bearings
- 140000 N
- 134000 N
- BUNTING BEARINGS BBEP182216 Bearings
- 17.5 mm
- 10 mm
- BUNTING BEARINGS BBEP162024 Bearings
- 14.00 mm
- 62.0000 mm
- BUNTING BEARINGS BBEP162012 Bearings
- 2.1 mm
- 2.2 kN
- BUNTING BEARINGS BBEP141610 Bearings
- 0.335 kN
- 4 N·m