BUNTING BEARINGS Bearing
Bunting Bearings is endeavoring to reduce its carbon footprint by using the world's resources as wisely as we can. This is enabling us to lower our consumption of Gas, Electricity and Raw Materials.
Bearings extend the working life of wheels, pulleys, and other rotating parts by reducing friction and enabling parts to move smoothly. Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads. Axial (thrust) bearings support loads parallel to the axis of the shaft, such as those exerted by a table supporting a weight. Radial bearings support rotating wheels and other applications where the force of the load is perpendicular to the shaft. Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads. Mounted bearings (bearing units) have a bearing inside a housing unit to ensure a secure fit and mount. Sleeve and clip bearings support high loads, have no moving parts, and require lubricant to allow the shaft to turn smoothly. Spherical bearings and spherical rod ends are used on articulating joints and when the bearing must accommodate for axial misalignment.
- BUNTING BEARINGS DPEF101320 Bearings
- 1900 rpm
- 212000 N
- BUNTING BEARINGS DPEF081005 Bearings
- 112 mm
- 190 mm
- BUNTING BEARINGS 18BU12 Bearings
- 137000 N
- 75.000 mm
- BUNTING BEARINGS 16BU24 Bearings
- 1.50 mm
- 23.00 mm
- BUNTING BEARINGS 28BU16 Bearings
- 46.038 mm
- 3.175 mm
- BUNTING BEARINGS 24BU08 Bearings
- 65 mm
- M 24x2
- BUNTING BEARINGS ECOP162036 Bearings
- 8 mm
- 80 mm
- BUNTING BEARINGS ECOP162024 Bearings
- 118 mm
- 800 r/min
- BUNTING BEARINGS ECOP152012 Bearings
- 102000 N
- Snap-Ring
- BUNTING BEARINGS ECOP141828 Bearings
- 10.000 mm
- 26.0000 mm
- BUNTING BEARINGS ECOP141616 Bearings
- 0.37 kg
- 1.1 mm
- BUNTING BEARINGS ECOP121812 Bearings
- 380 mm
- 2700 r/min